Showing home made cab. John Livingston and I built this cab. 1" Square tubing frame with 16 ga steel panels

The original dash, the radio and controls were moved to above the winsheild as lost 2 radios due to rain

Since this photo taken, I got a backhoe and had to raise the roof 6" to allow the seat to be turned around

I keep thinking I should add a hose from the top of the keg to inside just to make people think. Keg has about 600# of lead

Original plow setup. Since I have opted for the tach-n-go attachement system and have a plate that replaces the bucket. Moves the plow back 4"

I Had a 10KW PTO generator. Saw many photos of used one dented in due to hitting things so I built a box around this one. Wheels are to move it around the shop. Has been replaced by a wired-in standby generator

In the summer, the windshield, doors, and rear panel come off

The mice got into the bags of my bagger and Kubota wanted too much for new ones. So this is the skin from 2 top load washers, welded together with a trap door on bottom and a screen on top